Nothing in the world that can be more annoying than a noisy garage door. All the normal and it can happen with the best of us. That is why there is nothing to worry about in your garage door has been making a lot of noise lately.

It is just happening due to some hardware parts that are loose and need some lubrication to be done. It is also a possibility that your garage door needs padding for anti-vibration to be installed.

It is not Rocket Science to fix noisy garage doors and it is in fact very easy and does not take a very long time to be done properly. But the thing is that you need to know but exactly to do that is why we are here to help you today. So you do not need to worry anymore because we have got your back this time like we always do.

In this article, we are going to discuss how you can lubricate your noisy commercial garage doors!

So if you have got commercial garage doors in your home that are giving you troubles then keep on reading to find out more information below!

 1. Make The Hardware Parts Tight:

 The first thing that you need to do in order to resolve this problem is too tight all the hardware of your door full stop you can do this by taking a ratchet and making all the nuts tight. But make sure that you are not over-tightening all the screws and nuts. If you are over-tightening the bolts then it can cause further problems for you and the lag screw holes might strip.

 2. Old And Dysfunctional Rollers:

 The next step is that you need to make sure that your rollers are not too old and dysfunctional. When the rollers are worn out then it becomes a major reason for a noisy garage door. So all you need to do is to replace your old rollers with new nylon rollers.

 3. Lubrication:

 In the next step, you need to make sure that everything is lubricated in an appropriate manner and everything is in an ideal state. When there is not enough lubrication then it becomes the reason for a loud and annoying sound from the garage door stop make sure that you have lubricated the opener track with lubrication oil properly.

And do not forget to lubricate the threads as well.

 4. Lubricate The Roller Bearings And Springs:

 If you have a commercial garage door at your home that is giving you a lot of troubles and is making annoying noises then you need to lubricate all the bearings properly full stop you can purchase a good quality lubricant from any local hardware store that is near your home. They are not expensive either and costs less than $8. Make sure that you lubricate the pivot points and hinges as well.

 5. Pads For Anti-Vibration:

 The last thing that you need to do is to fix an anti-vibration pad between the mounting bracket and the ceiling of your home.